 |
 |
AGMA EP Gear Oils
Synergy® High performance EP gear oil, with
Synslide®. Royal Purple's best-selling EP gear oil is designed to
smoothly lubricate gears under virtually all conditions.
Thermyl-Glyde® Severe service gear and bearing
oil, with Synslide®. Has all of the advantages of Synergy® but
is recommended where heavy loads, shock loads, low operating speeds and
/ or high operating temperatures are encountered.
AGMA R & O Gear Oils
Parafilm® Compressor, pump, turbine and
general plant lubricant, with Synerlec®. Recommended for use in air
compressors, pumps, turbines, bearings and general plant equipment where
premium performance is desired but the use of a fully synthetic oil is
not a viable option.
Poly-Guard® FDA High performance FDA / USDA
H-1 oil, with Purolec®. Recommended for use in compressors, pumps,
gear boxes, bearings, blowers or almost any other equipment in food processing
or pharmaceutical plants requiring oil.
Synfilm® Synthetic air compressor and industrial
oil, with Synerlec®. Royal Purple's best-selling industrial lubricant
and is recommended for use in air compressors, pumps, bearings, gears,
air tools, etc.
Synfilm® GT Multi-purpose industrial oil,
with Synerlec®. Recommended for use in gas and steam turbines, blowers
and vacuum pumps, bearings, gears, air tools, etc. Synfilm® GT should
be considered instead of Synfilm® when: oil reservoir temperatures
exceed 200° F, improved low temperature fluidity is desired or when
a viscosity grade is not available in Synfilm®.
AGMA Worm Gear Oils
Synergy® Worm Gear Oil High performance
gear oil, with DynaGlyde®. A high film strength, para-synthetic lubricant
that contains slippery, synthetic molecules and special anti-wear additives
to provide the lubricity and oiliness properties necessary to excel in
worm gear lubrication (including cylindrical and double enveloping worm
gears).
Thermyl-Glyde® Worm Gear Oil Synthetic
gear oil, with DynaGlyde®. Recommended for use in very heavily loaded,
slow speed and / or high temperature worm gear service.
Thermax® Semi Fluid Grease Special purpose
synthetic grease for gear boxes, with Synslide®. An ultra-tough, aluminum
complex grease designed to lubricate gear boxes requiring the use of a
semi-fluid grease and leaky gear boxes.
Open Gear Lubricant
Open Gear Guard XP Dry film / EP lubricant,
with Synslide®. Designed to lubricate open gears subjected to heavy
loads in dusty or dirty environments. Easily applied by either spraying
or brushing.
Thermasil™ T-100 Maximum load silica gel
synthetic grease, with Synslide®. A viscous, water resistant, tacky
grease designed to protect extremely heavily loaded, low speed bearings
or sliding surfaces (such as open gears, skid-rails, etc.) that operate
in wet or hot environments where other EP greases perform poorly or even
fail.
Thermyl-Tuff® Maximum load synthetic lubricant,
with Synslide®. Recommended for heavily loaded open gears, skid rails,
bushings, couplings, bearings, cables, etc., or low speed bearings operating
at high temperatures.
Note: Performance properties and / or specifications
for all products subject to change without notice.
|
 |
|
|
|
To find the distributor nearest you, please call
888-382-6300
|
customer comments |
 |
|
|
|
|
“ During the 1st quarter we changed the lubricant used in
our 36 x 50 Centrifuges and gear boxes to Royal Purple Synfilm®
GT150.
We felt that a change was needed due to the high rate of failure.
Our machines run 24 hours per day and 7 days per week. It's easy
to see how this load could be hard on any lubricant.
Prior to making the switch we experienced 8-10 gearbox failures
a year at a cost of more than $10,000 each.
After converting to Royal Purple Synfilm® GT150 we have experienced
only one failure in the past year.
This has resulted in a dramatic improvement in the reliability
of our equipment, as well as an overall cost reduction as a result
of reduced repairs and downtime.
We are very pleased with all the Royal Purple® products we
are using.”
UCC Maintenance
|
|
 |
|
|
|
|
AGMA
EP Gear Oils